Samsung A605G U4 Touch Not Working Fix

Here is the Samsung A605G U4 Touch Not Working Fix, And Combination Flash file (stock ROM); Download the latest flash file for the Samsung A605G U4 Touch Not Working Fix. Operating system optimization, hang on logo or stuck logo only fix, boot loop fix, and dead after the flash fix

Problem Like For Your Samsung a6+ A605G Android Device
-After Flash Touch FIXED

There is another way to update your phone software for free, If the warranty on your phone is still running, then take it to the service center. And if you have your smartphone insured, then contact it

You can update the software of your phone very easily and that too at home
You just have to follow some rules
For example
Charge your phone’s battery 50%
Use a good USB cable
Use the Rear Slot

First Install Samsung USB Driver
Click Double Click And Setup Driver

Download Mode
Press Volume up-Menu-Power key
Now press again volume up key
you can see your Download mode is appear
Now connect the USB cable

Flash Tutorial
1st flash u4 combination file
after flash u4 combination file
open z3x and select all 4 file
the open PDA and uncheck “data”
select boot and uncheck “cmnlib”
Then flash

Hard Reset Is important
after flash press volume up and power key
then select wipe data and press yes
also select cache file and press yes
then reboot

Please comment if not work this method

Open And Download Odin tool
Click on AP and select “AP” file
BP and select the “BP” file.
CP and select the “CP” file.
CSC and select the “HOME CSC” file.

Open Odin the tool
Click on AP and select “ COMBINATION ” file
Now click the start button and wait until pass

Here is the Flashing Tutorial, you can use and flash your device (click here)

Full Firmware

Samsung A605G U4 Firmware And Combination: + Get Link

Flash Tool And Tutorial

Flash Tool For Software Update: Google Drive

Flashing Driver For USB Connectivity: Google Drive

Leave a Reply

Your email address will not be published.